Wheels

Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Paradigm SL TLR 24H Hole wheel - Lightweight alloy rim (26mm outer, 21mm inner width) - 6-bolt brake disc hubs - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Paradigm SL TLR 24H Hole wheel - Lightweight alloy rim (26mm outer, 21mm inner width) - 6-bolt brake disc hubs - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Races, training, group rides, gran fondos—Profile’s 58/Twenty Four Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide rim for maximum free speed and slicing right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/Twenty Fours and get ready to become a better rider.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Affordable and reliable disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience - 36 stainless steel spokes and brass nipples for improved durability - TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes.

- Affordable and reliable road rim brake wheelset - Black rim and hubs for a more modern look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Tiagra-grade RS400 hubs feature smooth, adjustable cup-and-cone bearings with polished races for superior, long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-11 speed compatible Shimano HG11 freehub body.

Upgrade or refresh your bike. - Original equipment replacement Trek Duroc 40 27.5 Boost wheels - 15x110mm front, 148x12mm rear, 6-bolt disc, and SRAM XD freehub - Extra wide alloy rim (40mm outer, 36mm inner width) is perfect for Plus tires - 550g rim is double wall, welded, and disc-specific

Upgrade or refresh your bike. - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual

Get back on the road with a genuine replacement wheel for your Cruiser Go!. When it's time to refresh your trusty bike, Trek original replacement wheels have you covered. PRODUCT DETAILS - Rear wheel equipped with Hyena hub motor - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

- Rims: Evo Tour 16 700C - ETRTO 662-17 - 6061-T6 Alloy - Double Wall with CNC machined sidewalls - Inner width: 16.6mm - Profile height: 27mm - Drilled for Presta valve - 32 holes Front hub: Shimano Tiagra HB-RS400 - 9x100mm - Polished angular contact bearings - Contact sealed hub - Quick Release Binder (Internal Cam) included Front hub (Bolt-on): Formula TH-50 Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Rims: WTB DX18 26'' (ETRTO 559), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (041812-01-26): Alloy, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Front hub (041810-01-26): Alloy, Sealed, Bolt-On, Solid CrMo axle 3/8'' x 100mm (L:140mm) - Anodized black finish - Adjustable bearings - Flange Nuts included

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01) : Alloy, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

- Lighweight and reliable performance road rim brake wheelset with an all-black modern look - Mavic Open Elite rims offers Mavic's renown quality at a budget-friendly price - Traditional box-shaped rim with great lateral stiffness and vertical compliance - Single stainless steel eyelets - Shimano 105 R7000 hubs are lightweight, reliable and feature adjustable cup-and-cone bearings with polished races for superior, long lasting high performance - 32 black stainless steel spokes and black brass nipples for long term reliability and good looks

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt Disc mount - Sealed Bearings (DC711 & DHT148) - TA Axles, not incl. - Quick Release binder incl. (DC2241) - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Upgrade or refresh your bike. - Original equipment replacement 24" 6-bolt disc brake wheels for Trek bikes - QR hubs: 100mm OLD front and Boost 141 rear - Pinned aluminum 35mm wide rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Get back on the bike with a genuine replacement wheel. When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Kovee TLR 28H Hole wheels - Convert to tubeless with TLR rim strip and valve, sold separately - Durable alloy symmetric rim with 22.5mm internal 27mm external width - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Designed for cross-country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - M-pulse hubs - Sapim Force Black 2.0/1.7/1.8mm spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

The ARC 1400 DiCut delivers its full potential whenever your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

The ARC 1400 DICUT is made to go flat out fast at full speed. Developed in partnership with the aerodynamic specialists from Swiss Side, the ARC 1400 DICUT is available in rim brake version in different rim heights. The Aero wheels support the complete system of rider and bike with minimal drag and superior aero stability in various conditions. The rim of the aerodynamically optimized wheel is identical to that of the ARC 1100 DICUT series. The wheelset is upgraded with a 240 DICUT Aero hub for ultra smooth rolling and speed. In a nutshell, perfectly equipped for races against the clock. - Carbon, Hooked / Crotchet tubeless compatible rim; the shape offers high aero stability and minimal aero drag for maximum speed - 240 Dicut Aero Hub with redesigned flanges - DT aero comp t-head spokes